location：HomePage > LiPo Battery
LiPo Battery

Curved LiPo batteries

Item:curved lipo battery
Brief:Curved lithium polymer batteries can be made at clients requirement, and it is one of our hit products, Bendable, rechargeable, thin, light, and with long shelf life

SPECS. ADVATAGES HOW TO MAKE? SAFETY TEST.

MarkynCurved^TM lithium polymer batteries can be made at clients requirement, and it is one of our hit products, Bendable, rechargeable, thin, light, and with long shelf life

Features:

Radian: 兀/6～2兀/3

Width: 8mm～50mm

Thickness: 0.5mm～10.0+/-0.5 mm

Capacity: 8mm～5000mAh

Main Application of Curved Lithium Polymer Battery:

i-watches, sports bracelets and wrist straps, etc.

markyncurved application

Battery shape:

Curved	Capacity (mAh）	Mold available	Dimensions			Type	C-Rate
Curved	Capacity (mAh）	Mold available	T (0.2mm)	W (±0.5mm)	L ±0.5mm	Type	C-Rate
251341R25.8	90	yes	2.5	13.0	41.0	Curved	0.2C-1.0C
201021R21.1	22	yes	2.0	10.0	21.0	Curved	0.2C-1.0C
201030R27.1	43	yes	2.0	10.0	30.0	Curved	0.2C-1.0C
351333R48.0	90	yes	3.5	13.0	33.0	Curved	0.2C-1.0C
221230R30.0	55	yes	2.2	12.0	30.0	Curved	0.2C-1.0C
200830R27.0	28	no	2.0	8.0	30.0	Curved	0.2C-1.0C
233080R60.0	450	no	2.3	30.0	80.0	Curved	0.2C-1.0C
251030R27.0	55	yes	2.5	10.0	30.0	Curved	0.2C-1.0C
232630R100.0	110	yes	2.3	26.0	30.0	Curved	0.2C-1.0C
302547R67.0	320	no	3.0	25.0	47.0	Curved	0.2C-1.0C
283048R50.0	350	yes	2.8	30.0	48.0	Curved	0.2C-1.0C
253648R48.0	400	no	2.5	36.0	48.0	Curved	0.2C-1.0C
151036R24	21	no	1.5	10.0	36.0	Curved	0.2C-1.0C
251040R36.6	65	no	2.5	10.0	40.0	Curved	0.2C-1.0C
351754R49.0	300	no	3.5	17.0	54.0	Curved	0.2C-1.0C
382030R40.0	150	no	3.8	20.0	30.0	Curved	0.2C-1.0C
652547R67.0	640	no	6.5	25.0	47.0	Curved	0.2C-1.0C

Specifications:

Note: 1、Ended with "R", it is curved type;

2、Contact our engineer if you need high density type(540WH/l) by info@gmbattery.com

Lithium Polymer Battery Work-Flow

1.Mixing ●Mix solvent and bond separately with positive and negative active materials. Make into positive and negative pasty materials after stirring at high speed till uniformity.
2. Coating ●Coat metal foils uniformly with the made-up pasty materials on two sides. Then make sheets dry.
3. Pressing ● Press the above positive and negative sheets till they become flat.
4. Cutting ● Cut a roll of positive and negative sheet into smaller sheets according to battery specification and punching requests.
5. Pole pieces ●Cut the pole pieces, solder poles, and plate adhesive tape automatically according to technical parameters.
6. Winding ●Separate the positive and negative plate with separator, wind into battery cells along central spindle, and then plate terminate tape.
7. Insulation Test 1 ●After separate anode and cathode by separator paper; a battery cell has formed, then test its insulation.
8. Sealing 1 ●Seal the upside after putting the naked cell into soft aluminum foil .
9. Sealing 2 ●Seal the left side.
10. Insulation Test 2 ●Test insulation of the terminal of the battery and the aluminum foil.
11. Insulation Test 3 ●Test battery cell’s insulation again after sealing.
12. Vacuum Drying ●Dry battery by vacuum, eliminate humid air gas completely, to make sure battery’s quality.
13. Electrolyte filling ●Fill with electrolyte in a dry glove box, relative humidity must be under 1%.
14. Sealing 3 ●Seal the filling opening in the glove box.
15. Detection ●Test battery’s internal resistance and the amount of electrolyte, see if it meets design requirements.
16. Activiting ●Charge and discharge the battery for the first time or more times, connect it to computer, monitor and record its performance indicators.
17. Air exhausting ●Air will exit inside battery after charging, draw it away until vacuum.
18. Sealing 4 ●Seal the right side, to insure good sealing performance.
19. Folding ●Cut the redundant soft aluminum foil and fold it automatically with an automatic folding machine.
20. Capacity testing ●Sort batteries according to their capacity with high-precision sorting equipments, which is watched and recorded their performances by computers at all times.
21. Aging testing ●Store batteries in batches in warehouse after inspecting their internal resistance, voltage, capacity and size in the conditions of 10~45℃ and relative humidity of 65±20%. 30 days is needed. Batteries will be re-inspected regularly every 8 days.
22. Assembly ●Assemble according to customers’ requests after aging. (The assembly ways can be different to meet the customer’s requests). The operator must inspect every batch battery's voltage, internal resistance and all aspect of performance before assembly.
23. Final inspection ●Inspect performance indexes of finished batteries according to GB/T18287-2000,strictly in accordance with GB/T2828.1 to make outgoing quality control, every singlebattery must pass sampling inspection before leaving factory.
24. Packaging ●Packaging consists of inner plastic tray and outer double corrugated carton, make them a whole pallet, strap them, wrap with stretch film to insure transportation safety, the packaging comply the regulation of packing storage graphic symbol GB191-1990.