Scope
This Specification describes the requirements for the lithium ion prismatic rechargeable cell supplied by GMB.
Basic Characteristics
Model
|
GMB103450AR
|
Housing Material
|
Aluminum foil
|
Nominal Voltage
|
3.7 V
|
Nominal Capacity(@ 0.2C (360mA))
|
2000mAh
|
Internal Impedance
|
40mΩ typ. 60mΩ max.
|
Discharge Cut-off Voltage
|
2.75V/cell
|
Charge Cut-off Voltage
|
4.20±0.05V
|
Max Charge Current
|
2000mA
|
Max Discharge Current
|
2C
|
Charge method
|
CC/CV (constant current/constant voltage)
|
Dimension(half charged)
|
Thickness: 10.5+0.0 –0.5 mm Width: 34.0+0.0 –0.8 mm Height: 49.0+0.0 –0.5 mm
|
Weight
|
About :37±2.0 g
|
Operating Temperature
|
Charging Temperature: 0~45℃
Discharging Temperature: -20~60℃
|
Storage Temperature
|
-5℃~35℃(suggest 25±2℃)
|
Relative Humidity
|
65±20%
|
Visual Requirements
|
Defects, such as scratches, flaws, dirty spots, rust, deformation, discoloration, leakage, etc., which impact commercial values shall not be allowed.
|
Shipping Voltage
|
3.70-3.90V(about 50% capacity)
|
Storage Voltage
|
3.70-3.90V
If the cell has been storage over half years, charge the cell with 0.5CmA or
1CmA of constant current and 3.9V constant voltage until the Charge cut-off current of 0.01 C5mA is achieved.
|
Environmental Request
|
The materials of the product and packaging are
RoHS compliant.
|
Dimension for dare cell
High Safety
Can pass punch、impact of heavy 、 or impact at 150 ℃ etc…
Thermal Strive at 150℃
The surface is flat and hard, most suitable for ipad or two-way radio.
Long Cycle-life
300 times at 80%
High C-Rate
5C、10C、20C、30C or more can be obtained.
Characteristics of high & low temperature
Can be discharged at 60℃, and at the same time, can be discharged at -20℃ or -40 ℃, according to your demand.
Bad Side: High in Production Cost
The above technology can be adopted for all the sizes of our lithium polymer batteries; our small cells, curved and thin cells can pass all the safety test with special materials.